Related Manuals for SIIG Industrial Grade USB Hub
Summary of Contents for SIIG Industrial Grade USB Hub
- Page 1 Industrial Grade USB Hub User’s Manual Industrial Grade USB Hub (ID-US0011-S1/ID-US0111-S1) User's Manual 04‐0781 VER: 1.0 ‐ 1 ‐...
-
Page 2: Copyright Statement
Industrial Grade USB Hub User’s Manual Copyright Statement No part of this publication may be reproduced in any form by any means without the prior written permission. Other trademarks or brand names mentioned herein are trademarks or registered trademarks of their respective companies. Disclaimer Information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any commercial damage, including but not limited to special, incidental, consequential, or other damage. VER: 1.0 ‐ 2 ‐... -
Page 3: System Requirements
Industrial Grade USB Hub User’s Manual Introduction This industrial‐grade USB 2.0 hub is compliant with USB 2.0 specification and can expand 1 USB port into multiple high‐efficient USB 2.0 port. It provides 15KV ESD protection for all signals. Designed for industrial usage and tough working environments, this hub comes in a metal housing with wall mountable and din rails. Features ■ Compliant with USB2.0 version specification, Hi‐Speed USB data transmission rate up to 480 Mbps ■ Bus‐power (no external power adapter required) and self‐power mode selection ■ Dual power input (AC or DC) supply ■ Support USB Plug‐and‐Play ■ Over‐current detection and protection circuit design ■ 15KV ESD immunity to serial interface ■ Automatic link and speed detection ■ Industrial grade rugged metal enclosure design ■ Wall and DIN rail mount support System Requirements ■ Windows® 7 / Vista / XP / 2000 ■ Mac® OS X v10.1 and later for PowerPC Mac ■ Mac OS X v10.4 and later for Intel Mac VER: 1.0 ‐ 3 ‐... -
Page 4: Package Contents
Industrial Grade USB Hub User’s Manual Package Contents ■ Industrial‐grade USB 2.0 Hub ■ Screws (3) ■ USB cable ■ 3‐pin power terminal block ■ DIN mounting kit Specifications Item Description 4 x USB2.0 (ID‐US0011‐S1 4‐Port Industrial Grade USB Hub) Ports 7 x USB2.0 (ID‐US0111‐S1 7‐Port Industrial Grade USB Hub) Connector USB‐A‐female ESD Protection 15KV ESD Transmission Speed 12M~480Mbps Interface USB2.0 Interface Connector USB‐B female Power Requirement Bus‐power/5V 3A DC/9~36V DC Operating Temperature 0°C to 60°C Operating Humidity 5 to 95% RH Dimension (LxWxH) 142 x 63.6 x 24.6 mm (without DIN Mounting Kit) Enclosure Material Metal Regulatory Approvals CE/FCC Specification is subject to change without further notice. VER: 1.0 ‐ 4 ‐... -
Page 5: Product Overview
Industrial Grade USB Hub User’s Manual Product Overview 4Port Industrial Grade USB Hub 1. USB 2.0 upstream 2. USB 2.0 downstream 3. DC power jack 4. 9~36VDC power terminal VER: 1.0 ‐ 5 ‐... - Page 6 Industrial Grade USB Hub User’s Manual 7Port Industrial Grade USB Hub 5. USB2.0 upstream 6. USB2.0 downstream 7. DC power jack 8. 9~36VDC power terminal VER: 1.0 ‐ 6 ‐...
-
Page 7: Powering The Hub
Industrial Grade USB Hub User’s Manual Powering the Hub DCIn Plug the supplied power adapter into the wall outlet, and connect it to the hub. Power terminal Plug the supplied power terminal block into the hub according to the connector's orientation. VER: 1.0 ‐ 7 ‐... -
Page 8: Driver Installation
Industrial Grade USB Hub User’s Manual DIN Mounting Kit Installation This hub can be placed to a fl at surface, mounted on a wall or attached to a standard DIN‐Rail. Screw the DIN mount kit into the hub as the illustration below before mounting. Driver Installation Important: This hub only operates at USB 2.0 speed when connected to a USB 2.0 controller. Otherwise, it will operate as a USB 1.1 hub when connected to a USB 1.1 controller. Windows and Mac will automatically install the correct driver when plugged into the computer. No additional driver installation is needed VER: 1.0 ‐ 8 ‐... -
Page 9: Regulatory Compliance
Industrial Grade USB Hub User’s Manual Regulatory Compliance FCC Conditions This equipment has been tested and found to comply with Part 15 Class B of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received and include interference that may cause undesired operation. WEEE Information For EU (European Union) member users: According to the WEEE (Waste electrical and electronic equipment) Directive, do not dispose of this product as household waste or commercial waste. Waste electrical and electronic equipment should be appropriately collected and recycled as required by practices established for your country. For information on recycling of this product, please contact your local authorities, your household waste disposal service or the shop where you purchased the product. VER: 1.0 ‐ 9 ‐... - Page 10 Industrial Grade USB Hub User’s Manual Blank Page VER: 1.0 ‐ 10 ‐...
-
Page 11: Technical Support And Warranty
Step 1: Submit your RMA request. Go to www.siig.com, click Support, then RMA to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request will be processed, if the product is determined to be defective, an RMA number will be issued. -
Page 12: Fcc Compliance Statement
Industrial Grade USB Hub is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Other names used in this publication are for identification only and may be trademarks of their respective companies.
Need help?
Do you have a question about the Industrial Grade USB Hub and is the answer not in the manual?
Questions and answers