Table of Contents
Advertisement
Quick Links
Introducing the HDMI 4-Port Switch
The HDMI 4-Port Switch allows you to connect and switch
up to four high-definition digital audio/video source
devices through one High-Definition Multimedia
Interface (HDMI) on your high-definition television.
Features and Benefits
Provides an all-digital audio/video connection
•
between devices such as HDTVs, DVD players/
recorders (Blu-ray®, HD-DVD, up-converting DVD),
gaming systems, digital cable/satellite boxes and
AV receivers
Provides four HDMI inputs and one HDMI output
•
Supports digital video & audio HDMI standard
•
1.3b specification
Signal amplification - extends interconnect copper
•
cable length up to 15 meters
Supports 480i, 480p, 720i, 720p, 1080i and 1080p
•
resolution
Easy switching between HDMI-enabled sources
•
using the IR remote control or Input Select button
Package Contents
HDMI 4-Port Switch
•
IR Remote Control and 2 AAA batteries
•
Power Adapter
•
Quick Installation Guide
•
04-0455B
HDMI 4-Port Switch
Quick Installation Guide
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SIIG CE-000012-S1
Summary of Contents for SIIG CE-000012-S1
- Page 1 HDMI 4-Port Switch Quick Installation Guide Introducing the HDMI 4-Port Switch The HDMI 4-Port Switch allows you to connect and switch up to four high-definition digital audio/video source devices through one High-Definition Multimedia Interface (HDMI) on your high-definition television. Features and Benefits Provides an all-digital audio/video connection •...
- Page 2 Layout Device LED IR Receiver Input Select Power LED Button Figure 1. Front Panel Layout HDMI In 1 HDMI In 2 HDMI In 3 HDMI In 4 HDMI Out Power Jack Figure 2. Rear Panel Layout...
-
Page 3: Remote Control
Remote Control On/Off Direct Input Select Next/Previous Input Select Figure 3. Remote Control... - Page 4 Installation Connect the HDMI cable (not included) from the HDMI source device(s) into the HDMI inputs. Connect the HDMI cable (not included) from your HDTV, monitor, projector or another HDMI receiving device into the HDMI Out port. Plug the power adapter into the HDMI switch. Plug the power adapter into a reliable power outlet.
- Page 5 Operation Turn On/Off Remote Control Press the On/Off button to power on or power off • the switch Front Panel Input Select Button Press to power on the switch. To power off the • switch, press and hold the button for 4 seconds Device Switching Remote Control Press the desired Direct Input Select button to go...
- Page 6 Blank Page...
-
Page 7: Technical Support And Warranty
Step 1: Submit your RMA request. Go to www.siig.com, click Support, then RMA to submit a request to SIIG RMA. If the product is determined to be defective, an RMA number will be issued. Step 2: After obtaining an RMA number, ship the product. - Page 8 Fremont, CA 94538-3152, USA HDMI 4-Port Switch is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Other names used in this publication are for identification only and may be trademarks of their respective companies.
Need help?
Do you have a question about the CE-000012-S1 and is the answer not in the manual?
Questions and answers