Table of Contents
Advertisement
Mechanical stage S mot. CAN
Measuring stage S mot. CAN
3.3
Connecting the mechanical /
measuring stage S mot. CAN
Connecting to the microscope system
•
Connect the stage directly to the corresponding
plug-in point CAN HD15 of controller EMS 3
with the CAN extension cable HD15 (Fig. 9/3)
via the upper connecting socket (Fig. 9/1).
•
Connect SOCP 3 (Fig. 9/5) to EMS 3
•
In addition to or as an alternative to SYCOP 3
the mobile coaxial drive XY CAN can be
connected using the latter's connecting cable
(Fig. 9/4) via the lower connecting socket
(Fig. 9/2) of the stage.
A device for transmitting a trigger
signal can be connected to the trigger
socket
(Fig. 2/1)
stage S mot. CAN.
•
Connect EMS 3 to the mains supply using
power cable (Fig. 9/6).
08/2012
SET-UP
Connecting the mechanical / ...
of
measuring
435465-9000-701
Fig. 9
Connections on the mechanical /
measuring stage
Carl Zeiss
19
Advertisement
Table of Contents
