Notes On Warranty - Zeiss Mechanical stage S mot. Operating Manual

Mechanical stage S mot. CAN
Measuring stage S mot. CAN
1.3

Notes on warranty

The manufacturer guarantees that the instrument is free of material or manufacturing defects when
delivered. Possible defects must be notified to us immediately and steps taken to minimize damage. If
notified of such a defect, the manufacturer is obligated to rectify it at his discretion, either by repairing
the instrument or delivering an intact replacement. No guarantee is provided for defects caused by
natural wear (wearing parts in particular) and improper use.
The instrument manufacturer shall not be liable for damage caused by faulty operation, negligence or
any other tampering with the instrument, particularly the removal or replacement of instrument
components, or the use of accessories from other manufacturers. Such actions will render any warranty
claims invalid.
With the exception of the work described in this operating manual, no maintenance or repair work is to
be carried out on these microscopes. Repairs may only be performed by Carl Zeiss service staff or
personnel specifically authorized by Carl Zeiss. In the event of a problem with the instrument, please
contact the Carl Zeiss microscopy service team or your local Carl Zeiss overseas representative.
08/2012
INTRODUCTION
Notes on warranty
435465-9000-701
Carl Zeiss
9