System Requirements; Safety And Special Notices; Special Notices; Safety Symbols And Signal Words - Thermo Scientific ISQ User Manual

System Requirements

Safety and Special Notices

Special Notices

Safety Symbols and Signal Words

Thermo Scientific
Your ISQ data system must meet these minimum requirements.
System Requirements
Hardware • 2.4 GHz processor with 4 GB RAM
• DVD/CD-ROM drive
• Resolution display 1280 × 1024 (XGA)
• 250 GB hard drive or larger
• NTFS format
Software • Microsoft™ Windows™ 7 SP1 Operating System (32-bit and 64-bit)
• Microsoft Windows XP SP3
• Microsoft Office™ 2007 or 2010 (32-bit only)
• Thermo Foundation 2.0 SP1 (Thermo Scientific software)
• Xcalibur™ 2.2 SP1 or later
Make sure you follow the precautionary statements presented in this guide. The safety and
other special notices appear in boxes.
Special notices include the following:
IMPORTANT Highlights information necessary to prevent damage to software, loss of
data, or invalid test results; or might contain information that is critical for optimal
performance of the system.
Note Highlights information of general interest.
Tip Highlights helpful information that can make a task easier.
All safety symbols are followed by WARNING or CAUTION, which indicates the degree of risk
for personal injury, instrument damage, or both. Cautions and warnings are following by a
descriptor. A WARNING is intended to prevent improper actions that could cause personal
Preface
System Requirements
ISQ User Guide xi