Table of Contents
Advertisement
The ventilator has two operation modes.
Master unit
mode. The ventilator acts as a Master unit. The Slave units and the mobile devices are connected to the Master unit via the
Wi-Fi connection. The Master unit is controlled via the mobile application, remote control or the sensor buttons on the ventilator casing.
The control signal is automatically transmitted to all the Slave units in the network. In this mode the ventilator receives signals from the
sensors (humidity sensor, external discrete sensor, external 0-10 V analogue sensor) and goes to a respective operation mode.
Slave unit
mode. The unit acts as a Slave unit in the network. The ventilator responds to the control signals from the Master unit only.
Any other signals from other controls are ignored. In this mode the TwinFresh Expert ventilators ignore signals from the sensors. In case
of communication loss with the Master unit longer than 20 seconds, the ventilator goes to the Standby mode.
Sensor-actuated
operation. The TwinFresh Expert ventilators respond to the signal from the sensors in the Master mode only.
The TwinFresh Expert Duo ventilators respond to the signal from the sensors in any mode (Master or Slave).
In case of actuation of any sensors for TwinFresh Expert, all the connected TwinFresh Expert ventilators go to the maximum speed. The
TwinFresh Expert Duo ventilators continue to run with the same speed.
In case of actuation of any sensors for TwinFresh Expert Duo, only the affected ventilator goes to the maximum speed according to the
humidity control scenario. The rest of the ventilators continue to run with the same speed.
Setup of the Wi-Fi parameters is only possible on Master units. To set up ventilator Wi-Fi parameters via the
Menu - Connection - WI-FI
mobile app, go to
Receive
Press the
button to display the current Wi-Fi settings.
Select one of the Wi-Fi operation modes:
Access point:
access point mode without a home router.
Select the desired security level for the
Open:
•
open network, not password-protected.
WPA PSK:
•
password-protected. The encryption technology based on the WPA protocol does not
ensure full security.
WPA2 PSK:
•
password-protected. The encryption technology is for modern networks.
WPA/WPA2 PSK:
•
password-protected (recommended). This combined technology activates WPA
and WPA2 and provides compatibility with any electronic devices.
Enter your access point password and press the
Client:
client mode. The ventilator operates in the home router network.
Enter the home router details and the IP address type for the
•
Enter the name of the Wi-Fi home router access point.
•
Enter the password for the Wi-Fi home router access point.
Select IP address type:
DHCP:
the IP address is set up automatically upon connection to the home router (recommended).
Static:
enables manual entry of the IP address, subnet mask and default gateway. These settings are
recommended for expert users only. Select this IP address type at your own risk.
Apply
Then press the
button.
20
WIRELESS CONNECTION OF SEVERAL VENTILATORS
WI-FI PARAMETER SETUP
setup.
Access point
mode:
Apply
button.
Client
TwinFresh Expert (Duo) R(M)W1-30/50/85/100(C1) V.2
mode.
www.vents-us.com
Advertisement
Table of Contents
