Vents-us TwinFresh Expert (Duo) RW1 Installation Manual

INSTALLATION GUIDE
SINGLE-ROOM REVERSIBLE ENERGY REGENERATION VENTILATOR
TwinFresh Expert (Duo) RW1
INSTALLATION
Pencil Drill Ø6 mm (1/4''), 40 mm (1 9/16'')
MOUNTING
1. Prepare a round core hole in the outer wall. The hole size is shown in the figure below. While preparing a core hole it is recommended to make preparations for layout of the power
cable and other required cables.
2. Install the air duct in the wall and fix it with mounting foam. The air duct end must protrude for the distance that enables installation of the outer ventilation hood (see the User's
manual for the outer ventilation hood).
VENTS-US
400 Murray Road
Cincinnati, OH 45217
Phone: 513-583-5786
www.vents-us.com
E-mail: sales@vents-us.com
Screwdriver
min 500
Ø170
min 500
Seal the centred
air duct using the
mounting foam
Tools required
Dowel Ø6 mm (1/4''), 40 mm (1 9/16'') 4 pcs.
A
Ø170
A
Inner side of
the wall
0 – 3
0 - 1 / ''
8
1
Screws Ø6 mm (1/4''), 40 mm (1 9/16'') 4pcs.
A A -
Outer side of
the wall
10 – 110
'' - 4 ''
3 5
/ /
8 16
TwinFresh Expert (Duo) RW1