Vents-us TwinFresh Expert RW1-50 V.2 User Manual page 23

CLOUD SERVER CONNECTION
The ventilators can be controlled using the mobile app via a cloud server connection. This functions enables control of a single or
multiple ventilators connected according to Diagram 2 over any distance using the mobile app connected to the Internet.
By default the Control via cloud server function is disabled.
To enable the function:
1. Enter the app menu.
Connection - At home.
2. Select
3. Select the desired ventilator connection.
4. Enter the connection settings menu.
Control via cloud server.
5. Enable
2 3 4 5
1
Note:
When this function is activated, any loss of Internet connection provided by the home server may result in temporary loss of
communication with the ventilator.
Menu - Connection - Through cloud
Create a new account for control of the Master ventilator. For that open the mobile app and go to
server:
1. Press the Add new account button.
2. Enter a login, a password and an e-mail address for password recovery. Then press the Apply button.
3. The app will log into the account automatically. Add a new Master unit.
4. To exit the account, press the respective button (if necessary).
5. Enter a ventilator name on your choice, the ventilator ID as stated on the control circuit board and the unit password (1111 by default).
1 2 3 4 5 6
6. Confirm the entries.
Menu - Connection - Through the cloud server.
To log into the account via the mobile app go to
Enter
Then enter the login and password and press the button.
www.vents-us.com
23