Hammer Strength MTS ROW Unpacking And Assembly Instructions page 12

MTS ROW Assembly Instructions
6. Bolt the top to the sides. Insert the 8 ½" x 4-1/4" hex bolts, star washers and nuts from the
top of the MTS ROW.
Tighten the bolts on the front and base to the sides. Using a ¾" socket wrench and
combination wrench, go back and tighten the bolts on the front and on the base of the
MTS ROW to the sides . Do not overtighten the bolts.
12
1/2" x 4-1/4" (8)
Assembly Figure 6. Bolt the top to the sides.
4-1/4" BOLT