Hammer Strength MTS ROW Unpacking And Assembly Instructions page 2

Hide thumbs Also See for MTS ROW:

MTS ROW Assembly Instructions

These instructions are divided into the following sections:

1. UNPACKING

2. ASSEMBLY

3. HARDWARE

The MTS ROW comes disassembled on a pallet. Follow the steps below to unpack and

assemble it.

WARNING: COMPONENTS OF THIS MACHINE ARE LARGE AND

HEAVY. USE CAUTION WHEN ASSEMBLING THIS MACHINE.

1. UNPACKING

Follow the steps below when unpacking the components of the pallet. Keep in mind that the

sides of the MTS ROW are heavy and not stable once they are unbolted from the pallet.

1. Remove the protective plastic wrap.

2. Remove the parts bag. This bag contains the washers, nuts and bolts shown in the

Hardware section in the back of these instructions. Remove the bags containing the seat

cushions. Also remove the arms.

3. Using a ½" socket, remove the lag bolts that secure the seat post, the back and the base.

See Unpacking Figure 1.