Hammer Strength MTS ROW Unpacking And Assembly Instructions page 10

MTS ROW Assembly Instructions
4. Bolt the front brace to the sides. Insert the top two ½" x 2-3/4" bolts with hammerhead
washers from the outside of the MTS ROW. Put on a star washer and hand tighten the
locknuts. Then insert the bottom two ½" x 2-3/4" hex bolts, hammerhead washers, star
washers and hand tighten the locknuts.
Assembly Figure 4. Bolt the front brace to the sides.
10
1/2" x 2-3/4" (4)
2-3/4" BOLT