Hammer Strength MTS ROW Unpacking And Assembly Instructions page 21

Hide thumbs Also See for MTS ROW:

The parts shown in Hardware Figure 1 are used to bolt together the sides, bottom brace, front

brace, seat and arms. They are:

1A. ½" x 2-3/4" hex head bolt (seat assembly-frame, front-sides, arms-top) (16) (0017-

00101-1573)

1B. 3" hex head bolt (sides-bottom) (4) (0017-00101-1582)

1C. 4-1/4" hex head bolt (top-sides) (8) (0017-00101-1576)

1D. Hammerhead washer (slide onto bolt under head) (16) (0017-00042-1041)

1E. Star washer (use two on bolts that do NOT have hammerhead washers and on

painted surfaces with nut) (32) (0017-00104-0379)

1F. 1/2" Locknut (28) (0017-00103-0223)

UPHOLSTERY HARDWARE

Hardware Figure 2. Upholstery bolts and washers.

2A. 3/8" x 1-1/2" hex head bolt (chest cushion to seat frame) (4) (0017-00101-1411)

2B. 3/8" x 2-1/2" hex head bolt (seat to seat frame) (2) (0017-00101-1417)

2C. 3/8" flat washer (6) (0017-00104-0313)

3/8" x 1-1/2"

3/8" x 2-1/2"

MTS ROW Assembly Instructions