Hammer Strength MTS ROW Unpacking And Assembly Instructions page 11

MTS ROW Assembly Instructions
5. Bolt seat assembly to MTS ROW.
A. Use two ½" x 2-3/4" bolts, star washers (two per bolt as shown) and nuts to fasten the
seat assembly to the front of the MTS ROW as shown in A below.
B. Use two 1/2" x 2-3/4" bolts, star washers (two per bolt as shown) and nuts, to fasten
the seat assembly to the base of the MTS ROW as shown in B below.
A
1/2" x 2-3/4" (2)
B
1/2" x 2-3/4" (2)
2-3/4" BOLT
Assembly Figure 5. Bolt seat assembly to MTS ROW.
11