Related Manuals for Hammer Strength HDCR
Summary of Contents for Hammer Strength HDCR
- Page 1 HEAVY DUTY COMBO RACK (HDCR) WARNING: Read and follow all directions for each step to insure proper assembly of this product. CLASS SB (Studio): Professional and / or commercial use (Commercial Use Only) PART #7946901 D-4 DATE: 2/08...
-
Page 2: Proper Usage
HAMMER STRENGTH HEAVY DUTY RACKS Purchasers of Hammer Strength products should read the Owner's Manual and all of the warning labels on the products before using them. Because these products may be used in commercial settings, it is the purchaser's responsibility to instruct all individuals, whether users, trainers or observers, on the proper usage of the equipment. - Page 3 MODEL SERIAL # MFG. & DESIGN BY GARY JONES & THE TROOPS MACHINE WARRANTY VOID IF TAG REMOVED For Service Call Life Fitness 800-351-3737 WARNING SERIOUS INJURY CAN OCCUR ON THIS EQUIPMENT. YOU MUST FOLLOW THESE PRECAUTIONS TO AVOID INJURY! and obtain instruction on the use of this machine.
-
Page 4: Limited Warranty
LIMITED WARRANTY WHAT IS COVERED This Hammer Strength commercial exercise equipment (Signature Benches and Racks) is warranted to be free of all defects in material and workmanship to the original purchaser for the specific items and duration listed: 10 years on structural frame 1 year on grips 1 year for rust or corrosion of structural frame. - Page 5 Insure the Product, and Include a letter explaining the defect or problem and a copy of your proof of purchase if you believe the service is covered by warranty Life Fitness World Headquarters Attn: CSS Help Desk 5100 N. River Rd.
- Page 6 3. Bolts: Most hardware is English and has a corrosion resistant finish. Grade 5 or greater in strength. 4. Equipment Anchoring: All machines have holes in the feet, these allow easy anchoring to the floor. Life Fitness rec- ommends that all machines be anchored to the floor to minimize the possibility of tipping.
-
Page 7: Components List
COMPONENTS LIST * ITEM NO. QTY. Refer to the HDCR8 and HDCR9 Parts List to identify part numbers for orders. REQUIRED TOOLS * 3/4” WRENCH * 9/16” WRENCH * RATCHET with 9/16” SOCKET * RATCHET with 3/4” SOCKET * 7/32” ALLEN WRENCH * Contact Customer Service at (800) 351-3737 or (847) 451-0036 for a detailed parts list. - Page 8 ½” Internal Lock Washer ½” Lock Nut HARDWARE: ½ X 3-1/2” Bolt ½ X 4-1/2” Bolt 3/8 X 4-1/2” Bolt 3/8” Flat Washer 3/8” Lock Nut Backing Dome Washer Backing Dome Washer...
- Page 9 STEP 1: Loosely assemble the two FRONT RIGHT UPRIGHTS (1) and the two FRONT LEFT UPRIGHTS (2) to the two BASES (3) using eight 1/2 x 4-1/2” BOLTS (4), eight BACKING DOME WASHERS (5), eight 1/2” INT LOCK WASH- ERS (6) and eight 1/2” LOCK NUTS (7). NOTE: Make sure the FRONT RIGHT &...
- Page 10 STEP 2: LOOSELY assemble the two CROSS SUPPORTS (8) and two PULL-UP SUPPORTS (9) to the top of the FRONT RIGHT & LEFT UPRIGHTS (1 & 2) using eight 1/2 X 4-1/2” BOLTS (4), sixteen 1/2” INT TOOTH LOCK WASHERS (6) and eight 1/2”...
- Page 11 STEP 3: Assemble the bottom of the four REAR UPRIGHTS (11) to the bottom of the BASES (3) using eight 1/2 X 4-1/2” BOLTS (4), eight BACKING DOME WASHERS (5), eight 1/2” INT TOOTH LOCK WASHERS (6) and eight 1/2” LOCK NUTS (7).
- Page 12 15 14 STEP 4: SECURELY assemble the bottom of the ten WEIGHT HORNS (12) to the REAR UPRIGHTS (11) using twenty 3/8 x 4-1/2” BOLTS (13), twenty BACKING DOME WASHERS (5), forty 3/8” FLAT WASHERS (14), and twenty 3/8” LOCK NUTS (15).
- Page 13 STEP 6: Assemble the the LONG BENCH LOCK (16) to the LOWER CROSS BRACE (10) using two 1/2 X 3-1/2” BOLTS (17), two BACKING DOME WASHERS (5), two 1/2” INT LOCK WASHERS (6), and two 1/2” LOCK NUTS (7).
- Page 14 STEP 7: Insert the two LEFT BAR CATCHES (18) and the two LEFT BAR SUPPORTS (19) into the desired slots of the two FRONT LEFT UPRIGHTS (2). Insert the two RIGHT BAR CATCHES (20) and the two RIGHT BAR SUPPORTS (21) into the desired slots of the two FRONT RIGHT UPRIGHTS (1).
- Page 15 STEP 8: Spotter Platform accessories are available for the HDCR8. Assemble each Spotter Platform (C) to the FRONT RIGHT & LEFT UPRIGHTS (1 & 2) using two BOLTS (D), two DOME WASHERS (E), two SPACERS (F), one WEAR PLATE (G), two FLAT WASHERS (H), and two NUTS (I) as shown in the illustration.
- Page 16 Action Daily Clean Hand Grips Inspect Visual Overall X Hardware Frame Hand Grips Clean: • Hand grips with mild soap and water. • Frame damage can be repaired with touch-up paint can be purchased from your Hammer Strength customer service representative. Inspect: •...