M200 Windrower - MacDon R85 Operator's Manual

6.6.2

M200 WINDROWER

DANGER
Stop engine and remove key from ignition
before leaving operator's seat for any
reason. A child or even a pet could engage
an idling machine.
a. Lower header to ground. If ground is soft, place
blocks under header.
b. Stop engine and remove key.
c. Move LH (cab forward) platform to rear of
windrower.
PRESSURE
d. Disconnect the two hydraulic couplers from
windrower valve.
C
e. Raise lever (A) and undo Velcro straps (B).
f. Move hose bundle (C) to store on header
Form # 169455
OPERATION
RETURN
A
B
22
g. Install caps on connectors and hose ends if
equipped.
PRESSURE
CASE DRAIN
h. At the header, disconnect electrical connector by
turning collar counterclockwise and pulling
connector to disengage.
i. Disconnect the two drive couplers, and case
drain coupler on header.
D
j. Move hose bundle from header and locate on
windrower LH side with hoses in support (D).
RETURN
ELECTRICAL
H
(continued next page)
Revision A