Header Angle - MacDon R85 Operator's Manual

6.10.6 Header Angle

Header (or cutterbar) angle can be varied from
0-8° below horizontal.
maximizes performance for your crop and field
conditions. A flatter angle provides better
clearance in stony conditions while a steeper
angle is required in down crops for better lifting
action.
The header angle can be hydraulically adjusted
from the windrower cab using hydraulic cylinder
without shutting down the windrower. Refer to
your MacDon
Operator's Manual.
Form # 169455
Choose an angle that
Self-Propelled Windrower
OPERATION
33
Revision A