M205 Windrower - MacDon R85 Operator's Manual

6.5.1

M205 Windrower

DANGER
Stop engine and remove key from ignition
before leaving operator's seat for any
reason. A child or even a pet could engage
an idling machine.
a. Move windrower left side platform to open
position.
b. Route the hose bundle (A) from the header,
under the windrower frame and attach hose
support (B) to bracket on windrower frame.
c. Remove caps and plugs from the two large
hoses and lines.
Form # 169455
A
B
OPERATION
F
d. Connect large hoses to the lines at (C) and (D)
as shown.
N·m).
e. Attach case drain hose coupler at (E).
f. Connect electrical harness to connector (F)
located beside the forward valve block on the
windrower.
g. Move windrower platform to closed position.
16
E
C
D
Torque fittings to 135 ft·lbf (183
Revision A