Recommended Lubricants - MacDon R85 Operator's Manual

7.3.2

Recommended Lubricants

•
Your machine can operate at top efficiency
only if clean lubricants are used.
•
Use clean containers
lubricants.
•
Store in an area protected from dust,
moisture, and other contaminants.
IMPORTANT
Do not overfill the cutterbar when
adding lubricant.
failure of cutterbar components may occur
if overfilled.
LUBRICANT SPEC
SAE Multi-
Grease
Purpose
Traxon
Gear
LS 80W90*
Lubricant
* or equivalent
Form # 169455
MAINTENANCE AND SERVICE
to handle all
Overheating and
DESCRIPTION
High Temp. Extreme Pressure (EP2)
Performance With 1% Max Molybdenum
Disulphide (NLGI Grade 2).
Lithium Base
High Temp. Extreme Pressure (EP)
Performance With 10% Max
Molybdenum Disulphide (NLGI Grade 2).
Lithium Base
High Thermal & Oxidation Stability.
API Service Class GL-5
USE
As Required Unless
Otherwise Specified.
Driveline Slip-Joints
Cutterbar
Conditioner
Gearbox
Bevel Gearbox
42
CAPACITIES
--
--
7 Pints (3.25 litres)
12 oz. (350 ml)
21 oz. (620 ml)
Revision A