M200 Windrower - MacDon R85 Operator's Manual

6.5.2

M200 WINDROWER

DANGER
Stop engine and remove key from ignition
before leaving operator's seat for any
reason. A child or even a pet could engage
an idling machine.
C
a. Disengage and rotate
clockwise to fu lly up position.
b. Remove cap (B) securing electrical connector to
frame.
C
c. Move hose bundle (C) from windrower, and rest
bundle on to header.
Form # 169455
OPERATION
B
A
lever (A) counter-
d. Check that hose support is positioned so that
lower bolt is in forward hole and support is
positioned as shown. Loosen bolts and adjust
as required.
e. Route hose bundle (C) from windrower through
support (D) on header.
f. Route header return and pressure hose bundle
(E) through support (D) on header, to windrower.
g. Lower and lock lever (A) .
h. Secure hose bundles with three cinch straps (F).
17
E
D
C
A
F
(continued next page)
Revision A