AJAX CombiProtect User Manual page 9

CombiProtect User Manual | Ajax Systems Support
2. CombiProtect
3. Settings
First Feld
Room
Delay When Entering, sec
Delay When Leaving, sec
Delays in Night Mode
Arm in Night Mode
Alarm LED indication
Motion Detector
Motion Detector Sensitivity
https://support.ajax.systems/en/manuals/combiprotect/?_ga=2.171224166.754703337.1648293156-504169808.1647685641
Setting Value
Detector name, can be edited
Selecting the virtual room to which the
device is assigned
Selecting delay time when entering
Selecting delay time on exit
Delay turned on when using night mode
When turned on, the detector will switch
to armed mode when using night mode
Allows you to disable the fashing of the
LED indicator during an alarm. Available
for devices with Frmware version
5.55.0.0 or higher
How to Fnd the Frmware
version or the ID of the
detector or device?
If active, motion detector will be active
Choosing the sensitivity level of the
motion detector:
High
Normal
Low
Why motion detectors react to
26.03.2022 13.55
Side 9 af 21