AJAX CombiProtect User Manual page 10

CombiProtect User Manual | Ajax Systems Support
Motion Detector Always Active
Glass Detector Enabled
Glass Protection Sensitivity
Glass Protection Always Active
Alert with a siren if motion detected
Alert with a siren if glass break detected
Jeweller Signal Strength Test
Detection Zone Test
Attenuation Test
https://support.ajax.systems/en/manuals/combiprotect/?_ga=2.171224166.754703337.1648293156-504169808.1647685641
animals and how to avoid it
If active, the detector always registers
motion
If active, glass breaking detector will be
active
Choosing the sensitivity level of the
glass detector:
High
Normal
Low
If active, the detector always registers
glass breaking
sirens
If active, added to the
system are activated when the motion
detected
sirens
If active, added to the
system are activated when the glass
break detected
Switches the detector to the signal
strength test mode
Switches the detector to the detection
area test
Switches the detector to the signal fade
test mode (available in detectors with
Lrmware version 3.50 and later)
Allows the user to disconnect the device
without removing it from the system.
Two options are available:
26.03.2022 13.55
Side 10 af 21