Using The S-Parameters Program - R&S NRP Series User Manual

®
R&S NRPxxA(N)
Example:
Usage:
[SENSe<Sensor>:]IGAMma:EUNCertainty?
Queries the expanded (k = 2) uncertainty of the magnitude of the complex input reflec-
tion coefficient Γ
becomes so small that it is practically negligible.
Example:
Usage:
9.8.3.6

Using the S-Parameters program

The S-Parameters program helps loading an S-parameter table into the power sensor.
The S-Parameters program is part of the R&S NRP Toolkit, see
"R&S NRP
To start the S-Parameters program
► In the Windows start menu, select "NRP Toolkit" > "S-Parameter Update Multi".
User Manual 1177.6017.02 ─ 08
IGAM:PHAS?
Query
-1.327654E+02
Response
Query only
. Following gamma correction, the residual mismatch uncertainty
in
IGAM:EUNC?
Query
5.000000E-03
Response
Query only
Toolkit", on page 29.
Remote control commands
Configuring basic measurement parameters
Chapter 5.1,
95