Maintenance, Storage And Disposal; Regular Checks - R&S NRP Series User Manual

®
R&S NRPxxA(N)

14 Maintenance, storage and disposal

It is advisable to check the nominal data from time to time.

14.1 Regular checks

If the power sensor is used frequently, check the RF connectors for visible damage -
bent inner conductors, broken contact springs and so on. If the RF connectors are
damaged, stop using the power sensor. Contact Rohde & Schwarz customer service,
see Chapter 12.5, "Contacting customer
Checking the integrity of the RF connector
1 = Perfectly formed contacts
2 = Normal wear
3 = Damaged contacts
Checking the concentricity of the RF connector
1 = Perfectly concentric
2 = Slightly off-center
3 = Excessively off-center
User Manual 1177.6017.02 ─ 08
1
1
Maintenance, storage and disposal
support", on page 149.
2
2
Regular checks
3
3
152