System:help:headers; System:help:syntax; System:help:syntax:all; System:info - R&S NRP Series User Manual

®
R&S NRPxxA(N)
Manual operation:
SYSTem:HELP:HEADers? [<Item>]
Returns a list of all SCPI commands supported by the power sensor.
Query parameters:
<Item>
Usage:
SYSTem:HELP:SYNTax? [<Item>]
Queries the relevant parameter information for the specified SCPI command.
Query parameters:
<Item>
Example:
Usage:

SYSTem:HELP:SYNTax:ALL?

Queries the implemented SCPI commands and their parameters. Returns the result as
a block data.
Usage:
SYSTem:INFO? [<item>]
Queries information about the power sensor.
If queried without parameters, the command returns all available information in the
form of a list of strings separated by commas.
If you want to query specific information, add the query parameter:
SYST:INFO? "<string>"
Query parameters:
<item>
Usage:
Manual operation:
User Manual 1177.6017.02 ─ 08
See "Firmware Update"
<block_data>
Query only
SYST:HELP:SYNT? 'sens:aver:coun'
Query only
Query only
"Manufacturer", "Type", "Stock Number", "Serial", "SW Build",
"Sensor Name", "Hostname", "IP Address", "Technology", "Func-
tion", "MinPower", "MaxPower", "MinFreq", "MaxFreq", "Resolu-
tion", "Impedance", "Coupling", "Cal. Due Date", "Cal. Abs.",
"Cal. Refl.", "Cal. S-Para.", "Cal. S-Para. (User)", "Cal. Misc.",
"Cal. Temp.", "Cal. Lin.", "SPD Mnemonic", "TestLimit", "TestLi-
mit pd", "Uptime"
"Hostname" and "IP Address" are available only for LAN power
sensors.
Query only
See "Sensor Information"
Remote control commands
Configuring the system
on page 51
on page 46
112