Communication Errors; Technical Assistance - Spectrum Controls Micro800 2085-OB32-SC User Manual

Expansion i/o 32-point 24 v sink/source discrete output modules
Table of Contents

Advertisement

3-12
Chapter 3:

Technical Assistance

User's Manual Pub. 0300309-01 Rev. B
Configuring the Micro800 Expansion I/O 2085-OX32-SC Using CCW
0×0000 in Micro850 Series A & B PLCs and Micro870 Series A PLC.

3.6.3 Communication Errors

If there is communication error between PLC and module, the following error
will be displayed in CCW:
Note that your module contains electronic components which are susceptible to
damage from electrostatic discharge (ESD). An electrostatic charge can
accumulate on the surface of ordinary plastic wrapping or cushioning material. In
the unlikely event that the module should need to be returned to Spectrum
Controls, please ensure that the unit is enclosed in approved ESD packaging
(such as static-shielding / metalized bag or black conductive container).
Spectrum Controls reserves the right to void the warranty on any unit that is
improperly packaged for shipment.
RMA (Return Merchandise Authorization) form required for all product returns.
For further information or assistance, please contact your local distributor, or call
the Spectrum Controls Technical Support at:
For Rockwell Automation Compatible I/O Products:
USA
United Kingdom
Australia
Mexico
Brazil
Europe
or send an email to support@spectrumcontrols.com
1-440-646-6900
01-908-635-230
1-800-809-929
001-888-365-8677
55-11-3618-8800
+49-211- 41553-630

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Micro800 2085-OB32-SC and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Micro800 2085-ov32-sc

Table of Contents