Table of Contents
Advertisement
The Keypad and Display Interface
Parameter
Status variable 1
3
Status variable 2
Status variable 3
Status variable 4
This menu contains the pick lists to select the variables to be displayed on the front panel default display.
Note: Table 3-60 contains name, abbreviation, display and variable columns of standard pick list variables
(used in the Historic Log Menu, the Display Variable Menu, etc.). The name column contains the name
of the display variable. This is what is displayed as the user scrolls through the list of available display
variables. The abbreviation column contains an abbreviation that is displayed after a variable is
selected from the list. The display column contains an even more abbreviated form of the variable
name. This final abbreviation (between 2 and 5 characters in length) is what the Perfect Harmony
displays on the front panel of the drive. The variable column shows the associated system program
variable for reference.
User-defined Display
Fixed display field
Top row of display shows
field names
3-62
Table 3-59: Display Parameters Menu (8000)
ID
Default
8001
DEMD
8002
%SPD
8003
VLTS
8004
RPM
User-defined Display
Variable #2
Variable #1
MODE DEMD
OFF
80
Figure 3-24: Dynamic Programmable Meter Display
s s s s
Perfect Harmony GENIII/e User's Manual
Description
Select variable 1 to be displayed on the LCD
display. Pick List – See Table 3-60.
Select variable 2 to be displayed on the LCD
display. Pick List - See Table 3-60.
Select variable 3 to be displayed on the LCD
display. Pick List - See Table 3-60.
Select variable 4 to be displayed on the LCD
display. Pick List - See Table 3-60.
User-defined Display
Variable #3
RPM
MVLT OAMP
0
0
0
A1A19000405A: Version 1.3
User-defined Display
Variable #4
User-defined display fields
Bottom row of display
shows dynamic values
Advertisement
Table of Contents
