Table of Contents
Advertisement
The Keypad and Display Interface
Parameter
Display Bypass Status
3
Reset Bypassed Cells
Neutral Connection
3-34
ID
Units
Default
2620
Function
2640
Function
2630
T2
s s s s
Perfect Harmony GENIII/e User's Manual
Min
Max
Displays bypass status: Same
format as for cell status.
A = available,
B = active,
U = unavailable.
Allows bypassed cells to be reset
when the drive is in an idle state.
Use the reset function only after
verifying that the problems with the
faulted cell(s) have been resolved.
Select the terminal, T1 or T2, which
forms the neutral connection. This
selection depends on the terminal of
cells A1, B1, and C1 that is used to
form the drive start-point neutral.
A1A19000405A: Version 1.3
Description
Advertisement
Table of Contents
