Table of Contents
Advertisement
OPTIMUM
M A S C H I N E N - G E R M A N Y
3
Assembly and commissioning
INFORMATION
The CNC machine is pre assembled. It is delivered in a transport box. After the unpacking and
the transportation to the installation site it is necessary to mount and assemble the individual
components of the CNC-machine.
3.1
Dimensions of the packing
Packaging F150
3.2
Scope of delivery
Compare the delivery volume with the delivery note.
Check the status of theCNC machinesaw immediately upon receipt and claim possible dam-
ages at the last carrier also if the packing is not being damaged. In order to ensure claims
towards the freight carrier we recommend you to leave the machines, devices and packing
material for the time being in the status at which you have determined the damage or to take
photos of this
status. We would like to ask you to inform us about any other claims within six
days upon receipt of the delivery.
Check if all parts are firmly seated.
3.3
Transport
WARNING!
Severe or fatal injuries may occur if the machine or parts of the machine tumble or fall
down from the forklift truck or from the transport vehicle. Follow the instructions and
information on the transport crate.
Centres of gravity
Load suspension points (Marking of the top sur-
face - arrows pointing to the top)
Prescribed transportation position (Marking of the
top surface)
Means of transport to be used
Weights
WARNING!
The use of unstable lifting and load suspension equipment that might break under load
can cause severe injuries or even death.
Check that the lifting and load suspension gear has sufficient load capacity and that it is
in perfect condition.
Observe the accident prevention regulations.
Fasten the loads properly.
Never walk under suspended loads!
GB
F150
Page 28
Length
Width
2540
2250
Original operating instructions
Height
2380
Assembly and commissioning
Version 1.1.6 dated 2014-10-16
Advertisement
Table of Contents
