Table of Contents
Advertisement
FLUE INSTALLATION
4.
Fit 13999020 Double Swaged Powder Coated Dress Tube over PVC assembly D, short swage down. Ensure
the seam lines up with the notch in the top panel E.
5.
Fit assembly B065411 650FSPIPE 1000 to continue flue length F. Ensure white spacer is located correctly
into the top of the assembly and use silicone grease on all red 'O' rings and cup seals.
6.
If required, carefully slide 15299020 Powder Coated Ceiling Plate over 1399015 Single Swaged Powder
Coated Dress Tube. Ensure the seam is lined up with the notch G.
7.
Slide 1399015 Single Swaged Powder Coated Dress Tube over PVC assembly, swage-up. This may have to
be done through the roof cavity. For a professional look, ensure the seams are 100% in line H.
Rinnai
D
F
G
H
16
E
650FS FIM
Advertisement
Table of Contents
