Omron Vision Sensor FH Series Connection Manual page 25

(Operation of the Teaching
pendant and the Vision
Sensor)
As shown on the right, when
"Robot Error" is show on the
Main Window of the Vision
Sensor, connection was failed.
3
Check the error message is
displayed on the operator
window, Check the wiring and
others.
(Operation of the Teaching
pendant)
The connection between the
Vision Sensor and the robot
4
controller was completed
successfully.
Press [Stop] (■) on the
teaching pendant.
Additional Information
This manual does not provide operation, installation, and wiring methods for each
device.
For details, refer to manuals noted in Related Manuals.
23