Omron Vision Sensor FH Series Connection Manual page 20

[Use the following IP
settings:], and then set the [IP
address], [Subnet mask], and
[Default gateway].
Set an IP address not to
overlap with other devices.
Tap [Select System] on the
"ABB Robotics Boot
3
Application" screen.
Select the system to start on
the "Select System" screen.
Tap [Restart Controller] on the
"ABB Robotics Boot
4
Application" screen to restart
the robot controller.
Copy a robot program
outputted from the data set
output tool to the USB
memory stick.
Insert the USB memory stick
storing the copied robot
program to a USB port on the
teaching pendant or the robot
controller.
From the "ABB Menu" of the
teaching pendant screen, tap
5
[Program Editor].
18