Table of Contents
Advertisement
Power supply connections
The range must be supplied with a 240V 60Hz power supply and connected to an individual, properly
grounded branch circuit protected by a circuit breaker, at 240V it has a maximum load of 30 amps.
The electric connection must be done by a licensed electrician.
The Aga Er7 cooker leaves the factory set up for connection to a power supply, the power cable and
standard four (4) prong type 14-50p plug are pre connected at the factory.
The picture below shows the power cable (not connected) and the main PCB pulled out of its
position within the cooker showing the electrical connections
Page 7 of 34
Advertisement
Table of Contents
