Tek Vision Diagnostics Screen With Errors Present - AGA RANGEMASTER eR7 Field Service Manual

TEK Vision diagnostics screen with errors present

Below is an example of the screen with a fault showing in red. This is showing a 130 error code on
the hotspot.
By pressing the 'view/save error count log' button this time, you can now see the number of times
the 130 error code has occurred (4 times) along with any other previous errors.This box is the error
code history of the PCB and will not change when the PCB is reset.
You will see above the fault count pop up box gives you the option to save the fault count to file.
This must be saved and kept safe on every occasion a fault is found. This may be required as any
fault diagnostic discussion with AGA.
Page 14 of 34