Tek Vision Opening Screen With Laptop Connected - AGA RANGEMASTER eR7 Field Service Manual

TEK Vision opening screen with laptop connected

When using the Tek Vision software ensure the cooker power on /off button is on.
Below is a step by step guide to navigating the tek vision software. With the cookers PCB connected
to your laptop using the appropriate connection key, double click the Tek Vision icon, Tek Vision will
open and the below will be shown on your laptop screen , the default screen is the set up screen.
To start using the diagnostics first click the 'serial port' option and select 'open port' as shown
below.
This will then open the set up screen which shows the correct pre-set temperatures for each cooking
zone. This is shown in the picture below. This will be the set up tab on the screen
Page 12 of 34