Table of Contents
Advertisement
TEK Vision diagnostics screen with no errors present
Below is the temperature tab which shows the cooker working in real time and you will see that
each zone shows the current temperatures recorded by the internal thermocouples and also in red it
shows if any errors are currently present. Below is a picture showing the screen with no errors
present and all zones are turned off.
To view the full error log, press the 'view/save error count log' button on the bottom right corner of
the screen. This will then open a pop up window which will show all the error codes along with the
time and date and the number of times the fault has occurred . This box will clear when the PCB is
reset.
Page 13 of 34
Advertisement
Table of Contents
