Running-In - MOTO GUZZI V85 TT Use And Maintenance Manual

•
In any case, every time you detect that the clutch has disengaged before the
standard factory setting.
To adjust, do the following:
•
Turn the adjustment screw (4) with the straight handlebar until the empty
travel corresponding to the fixed abutment on the handlebar is 0.08 in (2 mm)
•
Push the clutch control lever on the gearbox housing towards the rear wheel
•
Pull the clutch control lever placed on the gearbox towards the opposite side
(as in point 2) checking that the cable is not tightened.
•
During the previous operation, check that the cable lug turns freely around
its axis, regarding the clutch lever
•
Tighten the adjuster (4)
•
If after the adjustment at "point 1" it is not possible to ascertain the condition
03_14
of "point 4", contact an Authorized Moto Guzzi Dealer to check the proper
operation of the clutch control.
•
If the adjuster stroke (6) is not sufficient to ensure the required clearance,
contact an Authorised Moto Guzzi Dealer
03_15

Running-In

Running in is essential to ensure the durability of the vehicle. During the first 932 mi
(1500 km), observe the following rules to ensure the reliability and performance of the
vehicle throughout its lifetime:
•
Avoid full throttle starts and hard acceleration;
•
Avoid exceeding 4500 rpm (rpm);
125