3.4) Units (Units)
This menu allows you to change the settings for displaying the units and is divided as
follows:
3.4.1) Speed (Speed)
3.4.2) Fuel consumption (Fuel consumption)
3.4.3) Temperature (Temperature)
3.4.4) Pressure (where applicable)
02_61
3.4.5) Exit (Exit)
To return to the "Dashboard" menu, select "EXIT" on the menu and press the MODE
selector briefly in the middle.
3.4.1) Speed (Speed)
To render active the desired measurement units, expressed in MPH or km/h, select
the unit and briefly press the MODE selector in the middle. The confirmation of the
selection is indicated by the side check mark "V"
To return to the "Units" menu, select "Exit" on the menu and press the MODE selector
briefly in the middle.
NOTE
IF THE UNIT OF MEASURE SET AT THE FACTORY HAS BEEN CHANGED, THE
02_62
SPEED'S UNIT OF MEASURE WILL FLASH FOR 30 SECONDS EACH TIME THE
KEY IS ENGAGED.
73