Gear Pedal Adjustment; Running-In - MOTO GUZZI V7 III Manual

Gear pedal adjustment

IMPORTANT
TO REMOVE AND REPLACE THE GEAR SHIFT LEVER, CONTACT AN Author-
ized Moto Guzzi Dealer

Running-In

Running in is essential to ensure the durability of the vehicle. During the first 932.06
mi (1500 km), observe the following rules to ensure the reliability and performance of
the vehicle throughout its lifetime:
•
Avoid full throttle starts and hard acceleration;
•
Avoid exceeding 4,500 rpm;
•
Avoid hard or prolonged braking;
•
Do not ride for prolonged periods at sustained high speed; preferably ride the
motorcycle on varied routes with frequent, gentle acceleration and deceler-
ation;
•
Ride prudently to gradually gain familiarity with the motorcycle, testing pro-
gressively higher throttle apertures only as you gain confidence
IMPORTANT
THIS VEHICLE IS EQUIPPED WITH A SINGLE DISC DRY CLUTCH. IN CERTAIN
CONDITIONS, THE CLUTCH MAY EMIT A SLIGHT AND DISTINCTIVE ODOUR OF
CLUTCH MATERIAL. THIS IS NORMAL AND IS NOT INDICATIVE OF A FAULT.
IMPORTANT
THE FULL PERFORMANCE OF THE VEHICLE IS ONLY AVAILABLE AFTER THE
SERVICE AT THE END OF THE RUNNING IN PERIOD.
84