Additional lights (04_20, 04_21)
ADJUSTMENT
•
Placing the vehicle in driving position with the fog lights at a distance of 39
in (1 m) from a vertical wall, the upper edge of the projected light beam must
be at least 0.2 in (5 mm) lower than the height of the fog light optical centers
from the ground level.
04_20
•
For vertical adjustment, loosen the nut (1) of the screw (2), then position the
fog lights and tighten the nut at the specified torque to fix it into position.
•
For horizontal adjustment, use the screw (3) turning it clockwise to align the
light beam towards the road center and anticlockwise to obtain an inverse
alignment.
04_21
Bulb replacement
IMPORTANT
TO REMOVE, CHECK AND REPLACE THE ADDITIONAL HEADLAMPS, CON-
TACT AN OFFICIAL Moto Guzzi Dealer.
174