Advertisement
IMI 66-047
All clock setting and adjustment
10 or 11.
THE
SETTING
CLOCK
ITCM
1 .
Press
2 .
Dial the clock date with the key pad keys
YEAR
Hours must be expressed in the 24-hour format.
3 .
If the SMDR printer is installed and operating, the clock date
will be printed as follows.
** 01/08/86 16:OO
4.
Reset the minutes setting, if necessary, as follows:
a .
Repeat step 1.
b.
Dial the new minutes digits, and press the
A new clock date printing will
C .
5 .
To obtain a printing of the current clock date,
press
ITCM
Printing will occur automatically once each 24-hour period.
** MO/DY/YR 0O:OO
POWER INTERRUPTION
The system clock will continue to run for at least 30 minutes after AC
power has been removed from the system.
the 30-minute backup period, the following printing sequence will
occur:
LAST VALID CLOCK =
If power is not restored within the backup period, the following
printing sequence will occur when the power is restored.
CLOCK NOT VALID
The clock will begin running from the default date.
to the current date per the instructions above.
SYSTEM CLOCK INFORMATION
, then dial
MONTH
Values less than 10 must be dialed as OX.
*
#
#
(current date and 0O:OO hours)
(time of power return)
HR:MN
(default clock date)
be performed from station port
must
*
DAY
HOUR
NOTE
(Example)
If power is restored within
HR:MN
(time of power outage)
3-24
Programming
MINUTE
# key.
It must be reset
Advertisement
