Advertisement
IMI 66-047
l
Connect audio cassette tape recorder to music interface on side of
KSU.
l
DO not perform other programming action while tape system is active.
l
Program baud rate of tape data to be 100 or SO baud as desired. (See
System COS programming discussion for details.)
will be printed during the recording and loading of COS data.
- - - - -
To record currently stored COS program values on cassette tape for
later use, proceed as follows:
1 .
Install blank cassette tape, and prepare recorder for recording.
Cause recorder to-begin recording blank cassette tape from
2 .
beginning.
3 .
Press
Press appropriate program key to start recording process.
l
c37 = COS FEATURES
l
c34 = ALL SPEED DIALS
l
c35 = AUTODIALS (STA 010 - 025)
l
C36 = AUTODIALS (STA 026 - 041)
To abort procedure (if required),
5 .
l
Press ITCM * 7 4 6 * ITCM
l
Press program key C41.
COS recording requires approximately 12 minutes.
11 will ring when recording is complete.
COMPARING RECORDED DATA (Requires Data Printer)
l
Rewind cassette tape,
l
* 7 4 6 * ITCM
Press ITCM
l
Press program key C38
l
Start tape playback
l
Printer will print status as follows:
COMPARE TAPE TO COS DATA
COMPARE TAPE COMPLETE
COMPARE TAPE DATA ERROR
CASSETTE TAPE RECORD OF COS VALUES
-
-
-
and prepare recorder for playback.
appropriate response messages
3-22
Programming
Station port 10 or
Advertisement
