Advertisement
COS PRINTOUT
from station port 10 or 11, to print the class of service (COS)
configuration.
obtained.
When the printer is being used to obtain a COS printout,
the Station Message Detail Recording (SMDK) function is temporarily
SMDR data collection is continued by the system during a COS
printout operation; however, if more than two calls are logged for any
one line, call records may be lost.
1 Press
ITCM *
2 Press program key C39
3 Choose desired printout
All COS
System COS
Line C3S
Toll Tables
All station COS
One Station COS
COS printout begins immediately
4
Press *
SMDR PRIA~TOU'I:
The SlvlDK printout data is provided automatically as it is generated.
No
intervention is required to obtain the printout.
formatted as shown in Figure 3-2.
printout line can be selected through the
COS AND SMDR PRINTOUT
Partial or complete printouts can be
7 4 6
* (base level entry if not active)
c41
c34 plus 010 - 041
to choose station port
(ends procedure)
3-20
Either an 80-column or a 40-column
Programming '
The data is
Advertisement
