Advertisement
VERIFING TAPE DATA (Requires Data Printer)
To verify previously recorded cassette tape,
for play-back.
ITCM * 7 4 6 * ITCM
l
Start tape playback
VERIFY COS DATA TAPE
VERIFY TAPE DirTA COMPLETE
VERIFY TAPE DATA ERROR
LOADING COS DATA FROM TAPE
-
- -
To load previously recorded COS program values into system to replace
current program values, proceed as follows:
Install pre-recorded cassette tape, and prepare recorder for
playback
Press ITCM * 7 4 6 * ITCM
2 .
3 .
To load COS features,
l
Press HOLD
To load memory dialing numbers,
4 .
Start tape playback.
5 .
To abort the procedure (if required),
l
Press ITCM * 7 4 6 * ITCM
will ring when loading is complete.
- - -
3-23
Programming
Station port 10 or 11
Advertisement
