Troubleshooting by Error Code
5.28 Outdoor Fan Motor Abnormality
Applicable
All outdoor unit models
Models
E7
Error Code
Method of Error
Detect according to the value of current flowing through the PCB.
Detection
Detect error of the fan motor system according to the fan revolutions detected by the Hall IC
Error Decision
When overcurrent is detected (Detecting overcurrent 4 times will shut down the system).
Conditions
When the fan revolutions fall below a given level for a period of 6 seconds while in fan motor
Supposed
Fan motor failure
Causes
Disconnection of harness/connector between the fan motor and the PCB
Fan does not rotate due to foreign matter caught in it
Clearing condition: fan motor performs normal operation for a period of 5 minutes
202
during the fan motor runs.
rotation mode (Detecting shortage of revolutions will shut down the system).
SiME332106E
Part 6 Service Diagnosis