Daikin VRV RXYMQ-A Series Service Manual page 108

Field Settings for Indoor Unit
1.4.24 Swing Pattern Settings
Set the flap operation in swing mode.
With the factory swing, flaps facing each other are synchronized to operate, and flaps placed
side by side are set to swing in an opposite direction to agitate airflow to reduce temperature
irregularity.
Conventional swing operation (all direction synchronized swing) can be set onsite.
13 (23)
1.4.25 Airflow Direction Adjustment Range
Make the following airflow direction setting according to the respective purpose.
 FXFSQ-AR, FXAQ-AR
13 (23)
Note(s)
1. Some indoor unit models are not equipped with draft prevention (upward) function.
2. When the model FXFSQ-AR is attached with a closing member kit, set the Second Code No.
1.4.26 Setting of Static Pressure Selection
 FXDQ-PD, FXDQ-ND
Model
13 (23)
102
Mode First Second
No. Code No. Code No.
01
2 02
03
Mode First Second
No. Code No. Code No.
01
4 02
03
to 02 or 03.
First Code Second
No. No. Code No.
01
5
02
Contents
All direction synchronized swing
—
Facing swing
Contents
Draft prevention (Upward)
Standard
Ceiling soiling prevention (Downward)
Contents
Standard (10 Pa)
High static pressure (30 Pa)
Part 5 Field Settings and Test Operation
SiME332106E
: Factory setting
: Factory setting
: Factory setting