Voxelab Aquila C2 User Manual page 22

Load the filament
装料
The methods of replacing filament:
1. Select [Unload Filament], waiting for the filament unload completed, pull filament out from the feeding assembly; repeat the load process.
2. To replace filament during the printing process, rotate the knob to slow the printing speed to 10% and cut off the filament nearby the feeding assembly.
Insert the new filament into the filament tube, adjust the printing speed to 100%, and resume printing.
更换耗材：
1.选中【Unload Filament】，等待退丝完成，将耗材从进丝组件中抽出；重复进丝步骤。
2.打印过程中更换耗材，旋转旋钮将速度调整为10%，在靠近进丝机构处将耗材剪断。将新耗材缓缓送入导丝管，再将打印速度调节为100%，继续打印。
21