Voxelab Aquila C2 User Manual page 18

Level
10
调平
Check the steadiness of the build plate before leveling. If the build plate is unsteady,
please use open-end wrench to adjust the V-wheel to steady it.
调平平台前请确认一下平台有无晃动；若有，请使用开口扳手调节一下左右两侧v型
轮松紧度，使得平台滑动顺畅且无晃动。
Press knob, select [Motion] - [Auto Home] first to ensure the extruder in the home position; then select [Disable Steppers] to assist in leveling.
按压旋钮，选中【Motion】-【Auto Home】，等待喷头自动回零；选中【Disable Steppers】以便进行下一步调平操作。
Leveling operation video can be found on Voxelab Youtube channel
17
！
During the leveling process, please do not
touch the filament tube and nozzle cable.
调平过程中，请不要触碰导丝管及喷头排线。
Note: The UI information is only for
reference, the actual UI may be different.
注意：界面仅供参考，实际以UI为准。