Table of Contents
Advertisement
Main / Home Screen Defined (Cont'd.)-
Right Side Fields
defined:
Select Program drop down window = This field
allows you to quickly select a program from the
files copied to the controller's memory.
Active Tool = This references the current tool in
spindle.
Feed rate = This shows the current federate as
dictated by the active program.
Spindle RPM = This shows the current spindle
speed.
Start at Block = This is the run from line number
function. With the machine in a Stopped state input
the line in which you would like to start from and
press the Run button.
Start at Tool = This field allows the program to jump
to a specific tool for it's starting point. Input the tool
number desired then press run. There will be a
slight delay while the code is scanned to the
requested starting point.
35
Advertisement
Table of Contents
