Main / Home Screen Defined (Cont'd.)-
Coord's Selector/Lower Right Drop
Down = This is the selector for the X,Y,
and Z coordinates displayed at the
bottom of the Main Page.
FROM DRP DOWN MENU-
1. ZPO Coordinates – These are based
on the G54-G59 set and selected
from the Jog screen.
2. Machine Coordinates – These are
the actual distances from machine
"Zero".
3. Relative Coordinates – These are
resettable to zero from current
position and equate to a digital tape
measure function.
CNC Monitor = These 5 lines
are displaying the CNC "G"-
Code as it is running
.
DROP DOWN MENU
36