Laguna Tools Smartshop Composite Fabricator 16 Manual page 2

Table of Contents
Receiving and CNC Introduction: Pg. 4.
Machine Set-Up: Pg. 5-8.
Parts and Main Components of the Smartshop (SUVII) Composite Fabricator: Pg. 9-10.
Glossary of Main Components of the Smartshop (SUVII) Composite: Pg. 11-12.
More & Additional Safety Information for CNC Machine: Pg. 13.
Machine Set-Up: Pg. 14-15.
Fitting the Router Bit into the Router Head: Pg. 16-17.
Machine Operation: Pg. 18.
Manual Tool Release: Pg. 19.
Types of Router Bits: Pg.20-22.
Water Pump Assembly Protocol: Pg. 23-24.
Tool Clips: Pg. 26.
Automatic Tool Contact Button or Tool Touch Off: Pg. 27
From "Set-Up" Screen to CNC Tool Data: Pg. 28.
Electrical Cabinet & Control Panel: Pg. 29.
Turning on the Machine: Pg. 30-31.
Main Screen Button(s) & Flow: Pg. 32.
Main / Home Screen Defined: Pg.33-36.
Main Screen Buttons & Flow to proceed to CNC Positions: Pg. 37.
Loading a Program into the Machine: Pg. 38-42.
Activate Start Program/File in the Machine: Pg. 43.